This is a silicone-based liquid gasket that fills gaps on a flange surface and prevents leaks. When cured, this product forms a rubber-like body that resists heat and seals joints subjected to high temperature. Gear and engine oil resistant, Yamabond 4 Motorsports sets in 60 minutes. Not for use on copper or copper-based alloys.
88 ml
Air Filter Cleaner is used to clean foam & fabric air filters that have been treated with petroleum based oil. Use this cleaner to clean filters treated with Yamalube Foam Filter oil.
Strongly recommended for E-10 fuels, this alcohol-free formula helps prevent fuel oxidation and phase separation from moist, rich air. When used continuously, it keeps fuel fresh, potent and free from gum and varnish for up to one year of storage. Its metal filmers, provide extensive protection for steel and aluminium components. Mix Ratio: Operational Use – Mix at 378:1 (2.65ml per litre) Storage Over 2 Months – Mix at 125:1 (8ml per litre)
Strongly recommended for E-10 fuels, this alcohol-free formula helps prevent fuel oxidation and phase separation from moist, rich air. When used continuously, it keeps fuel fresh, potent and free from gum and varnish for up to one year of storage. Its metal filmers, provide extensive protection for steel and aluminium components. Mix Ratio: Operational Use – Mix at 378:1 (2.65ml per litre) Storage Over 2 Months – Mix at 125:1 (8ml per litre)
Marine multi-purpose grease provides superior lubrication, most versitile formulation, highly resistant to water – even saltwater, resists washout, aheres to all frictional surfaces unaffected by engine or boat vibrations.
Extreme-pressure grease lubricates high loads, Non-corrosive, water-resistant, exhibiting low-friction properties that protect against wear and galling in difficult operating conditions. Use this grease where specified in the Service manual to use grease “M”.
Formulated with Deposit Control, resists oxidation and rust on components with operating temperatures between -10F and 325F. Designed for the High temperature and speed exhibited in mechanical bearings of the primary sheave. Use this where specified in the service manual to use Grease “H”.
This premium quality formula is non-foaming and resists heat and pressure normally found in power steering and power trim and tilt systems. It allows for smooth quiet operation and reduced wear. Meets Yamaha factory requirements
This premium quality formula is non-foaming and resists heat and pressure normally found in power steering and power trim and tilt systems. It allows for smooth quiet operation and reduced wear. Meets Yamaha factory requirements
Helps prevent ring sticking, varnish and carbon build up in your engine. This fuel additive employs the highest grade of engine cleaning technology to keep your engine running smoother and stronger. Recommended for use as a constant treatment, or as a “Shock Treatment.”
For two and four stroke engines.
Helps prevent ring sticking, varnish and carbon build up in your engine. This fuel additive employs the highest grade of engine cleaning technology to keep your engine running smoother and stronger. Recommended for use as a constant treatment, or as a “Shock Treatment.”
For two and four stroke engines.
Designed specifically for use in the FJR1300/1300A, ’09~ newer VMAX & ’10 ~ newer Tenere.
This coolant premix is a specially formulated anit-freeze, anti-boil and anti-corrosion coolant / water mixture. Pre-blended at a 50:50 ratio with special additives to increase the products performance and longevity, and is ready to use. Long Life.
A high quality, full synthetic chain lubricant for use in off-road and on-road applications, as well as both race and recreational environments.
Its a Long-lasting deep penetrating lubricant that resists corrosion and water.
For use on all Motorsports drive chains including o-ring chains.
