Provides spare prop installation components for the models listed. (For other models, order parts individually from the standard parts list.)
Provides spare prop installation components for the models listed. (For other models, order parts individually from the standard parts list.)
Provides spare prop installation components for the models listed. (For other models, order parts individually from the standard parts list.)
DESIGNED FOR 4 STROKE OUTBOARDS AND INBOARD BOAT ENGINES.
* AT 500 HOURS OPERATION THE METER WILL FLASH "VALVE SERVICE NOW".
* PICK-UP WIRE LENGTH CAN BE TRIMMED.
Replacement filter element (requires bowl attachment) featuring the 10-micron Aquabloc filter media.
This high-volume (290 liters/minute) 12 volt portable air pump inflates and deflates towables, boats, pools, mattresses and beach toys quickly and effectively. Most pumps on the market don’t put out this kind of air pressure and volume (9.6 cu.ft./min., .8 psi). The universal valve fittings fit all popular valves. For added convenience, the cigarette lighter/12 volt power port plug is equipped with a 10’ long power cord.
Designed to work with Yamaha’s Fuel Management Gauge. Assembly includes mounting head, spin-on element, powder-coated metal bowl, and sensor probe. Features proprietary 10-micron Aquabloc filtration media (a resin-impregnated pleated cellulose to repel water).UL listed and meets USCG requirements.
Our deluxe adjustable bindings were designed with ease of entry in mind. The unique combination of the heel and toe overlay into one allows for both style and adjustability. The front lace design allows for quick entry/release and accommodates a wide variety of foot sizes. These bindings will not only feel good in the water, but also offer a simple function at an extremely affordable price. Accommodates most foot sizes.
These contour fenders stay put and stow conveniently under boat seats. They hinge to wrap around the gunwale and hull, following the contours of the boat. Constructed of a durable marine-grade, tri-laminate cover, with closed cell foam inside. There’s a tough polycarbonate grommet at each end for hanging from cleats. 24" long x 6" wide x 2-1/2" thick
These contour fenders stay put and stow conveniently under boat seats. They hinge to wrap around the gunwale and hull, following the contours of the boat. Constructed of a durable marine-grade, tri-laminate cover, with closed cell foam inside. There’s a tough polycarbonate grommet at each end for hanging from cleats. 24" (60cm) long x 6" (15cm) wide x 2-1/2" (6cm) thick.
The Yamaha Trailering Tilt Motor Support has been designed to allow highway transport of your boat with the motor in a tilted position. The trailering support prevents the motor from returning to the vertical position and possible contact with the road surface. The Motor Support also prevents excessive loads, created by road surface conditions and from damaging the tilt assembly.
Note:
The Yamaha Trailering Motor Support can be cut to size, if your outboard sits too high or you have problems with tilting your motor high enough to install this support. Simply cut the Motor Support to the appropriate length using a mitre or hacksaw.
Fitment:
For both two and four stroke models, 8 – 115HP with a single ram power tilt assembly only.
Will also fit: F115B, F130 and VF115.
The Yamaha Trailering Tilt Motor Support has been designed to allow highway transport of your boat with the motor in a tilted position. The trailering support prevents the motor from returning to the vertical position and possible contact with the road surface. The Motor Support also prevents excessive loads, created by road surface conditions and from damaging the tilt assembly.
Note:
After installing the outboard trailering support(s), the outboard is tilted down until the trim rods start to retract. The Yamaha Outboard Trailering Supports can be customized for applications with restricted full tilt up angles due to interference with the boat or other components. A maximum of 1-_" may be removed from the overall length to permit installation of the trailering supports. Cut lines, in _" increments, are located on the trailering support for ease of cutting. When reducing the overall length, cut or grind off material to duplicate the original end taper, on the cut end, to allow proper function of the outboard trailering supports. Failure to taper the cut end will cause damage to the support and prevent proper support of the outboard.
Fitment:
Use one support for F115 – F250 four stroke and all 60 – 300HP two stroke models while trailering.
Will not fit: F115B, F130 and VF115 (see part number MAR-MTSPT-WD for these)
For F300 – F350 models require two supports.
They are quickly installed over the port trim rod on F115 – F250 four stroke and all 60 – 300HP two stroke models or both trim rods on the F300 – F350 V8 models.
Trailering supports must be used on twin ram motors.
Paint Dark Grey Mettalic Suits ’1994>Yamaha Colour Code 4D
Metallic Marine BlueYamaha Colour Code EJ >1983
Metallic silver to suit 1984 – 1993.Yamaha Colour Code EK
Harbour white gloss finish.Yamaha Colour Code EL
Gloss BlackYamaha Colour Code NA
Paint clear coat 400cc
Marine etch primer 400cc,Essential in the painting process of alluminium.
Fits most mid-size tires. Yamaha Tuning Fork Logo.
This tube tow rope has two sections, giving you the option to be either 50 or 60 feet behind the boat depending on wake and water conditions. The pre-stretched, UV-resistant, 7/16"-diameter, 16-strand rope exceeds the 2,375lb (1077kg) break strength required by the WSIA for 2-rider tubes. A Rope Keeper is included for convenient storage.
Vinyl Repair Kit
Yamaha factory approved genuine “Large” water separator / fuel filter, recommended for up to 250HP. Being genuine helps to satisfy your need for a high quality and reliable filter which is essential for this type of product.
Filters features:
Replacement 10 micron filter element is: 90794-46868
Note: For 4 stroke motor use only (10 micron element is not recommended for extended 2 stroke premix use).
10mm Fittings available in both straight and 90 bend. See P/N’s NPT3325 and NPT3334 in the drop down list below.
Yamaha factory approved genuine “Large” water separator / fuel filter, recommended for up to 250HP. Being genuine helps to satisfy your need for a high quality and reliable filter which is essential for this type of product.
Filters features:
Replacement 10 micron filter element is: 90794-46868
Note: For 4 stroke motor use only (10 micron element is not recommended for extended 2 stroke premix use).
10mm Fittings available in both straight and 90 bend. See P/N’s NPT3325 and NPT3334 in the drop down list below.
Water separator filter assy with aluminum head. Includes all fittings.Racor’s genuine Aquabloc filter media is engineered to repel water and remove solid contaminants before they can damage precision engine components. Rated to 60gph, 227lph 10 MicronHigher quality filter ideal for use on carby engines, please check with your local Yamaha dealer for correct fitment.
Clear bowl only has a spare plug for water sensor.
Replacement element for:B32014
Filter #S3227Filter features clear contaminant collection bowl with drain valves for outboards. 10-micron aquabloc 2 media. High capacity and long service life. Rated to 60/90GPH depends on fitment.
135cm Yamaha Wakeboard only. Remix Wake Boots (shown on board) sold separately SBT-REMIX-ST-13.
This Yamaha kneeboard is lightweight,stable, and responsive. It’s traditional V-shape design provides fast responses, smooth fluid turns and big air off the wake. The contoured EVA kneepad has deep knee wells and reinforced toe areas. The 3" (7.6cm) wide adjustable strap is cushioned for comfort.
Remix Wake Boot by Hyperlite. Fits foot size 7 to 10.5.
Boots shown here with Yamaha Wakeboard 135cm, sold separately SBT-HL135-00-11.
This 75 foot (23mtrs) long rope has 4 sections 40ft (12mtr), 10ft (3mtr), 10ft, 15ft (4.5mtrs). to meet the needs of skiers and riders of all skill levels. The 13-inch (33cm) aluminum core handle has a performance EVA "amoeba" grip and full-length molded finger protectors. Top quality UV-treated 16 strand 1,600lb (726kg) tensile strength rope. A rope Keeper is included for tangle-free storage.
This 4 rider tube tow rope has 2 sections, giving you the option to tow either 50 feet (15mtr) or 60 feet (18mtr) behind the boat depending on wake and water conditions. The pre-stretched UV -resistant 5/8" diameter 16-strand rope exceeds the 4150 pound break strength required by the WSIA for 4 rider tubes. A 6" foam float is provided for the extra buoyancy. A rope keeper is included for convenient storage.
Water separator filter assy with sight glass, Stainless Steel Head. Includes all fittings.Rated to 60gph, 227lph 10 Micon.Racor’s genuine Aquabloc filter media is engineered to repel water and remove solid contaminants before they can damage precision engine components. Requirement for Yamaha HPDI and EFI outboard motors.
Water separator filter assy with sight glass, aluminum head and water sensor probe.Includes all fittings.Rated to 60gph, 227lph 10 micron.Racor’s genuine Aquabloc filter media is engineered to repel water and remove solid contaminants before they can damage precision engine components. Requirement for Yamaha HPDI and EFI outboard motors.
Yamaha Branded Cowl Covers by OCA.
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
So no matter what your leisure time activity may be, whether you are waterskiing, fishing or are simply moored, your engine will be kept in pristine condition.
Yamaha Branded Cowl Covers by OCA.
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
So no matter what your leisure time activity may be, whether you are waterskiing, fishing or are simply moored, your engine will be kept in pristine condition.
Yamaha Branded Cowl Covers by OCA.
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
So no matter what your leisure time activity may be, whether you are waterskiing, fishing or are simply moored, your engine will be kept in pristine condition.
Yamaha Branded Cowl Covers.
Our Yamaha Cowl covers are fully-vented engine covers specifically designed to protect the cowling whilst the engine is running. Our Splash Covers fit like a second skin and are made from felt backed Polysoft®, a marine grade fabric which is waterproof, breathable and UV stable.
Splash Covers are designed to remain on the engine at all times protecting the cowling from:
So no matter what your leisure time activity may be, whether you are waterskiing, fishing or are simply moored, your engine will be kept in pristine condition.