This guard helps protect the rear brake master cylinder from possible damage and provides a surface for rider feel.
Fits:
- 2007 – 2014 WR250F
- 2007 – 2011 WR450F
- 2006 – 2012 YZ250F
- 2006 – 2009 YZ450F
Burdekin Motorcycles
This guard helps protect the rear brake master cylinder from possible damage and provides a surface for rider feel.
Fits:
Designed to be used with the stock exhaust system to offer a power increase while allowing your muffler to have a rating of 96 dBA.
Fits:
This 4.06mm aluminium plate is designed with side skirts to help protect the lower frame rails, critical engine components, water pump, ignition cover, and clutch components even on the gnarliest enduro course.
Fits:
Made of ultra-durable UHMWPE (Ultra High Molecular Weight Polyethylene), this disc guard is designed to flex and not bend upon impact. Improved durability in gnarly off-road conditions. Machined collars and OE style hardware allows for easy, same tool installation.
Fits:
The full titanium construction header can provide as much as a 3-horsepower boost when used with the GYTR Titanium slip on pt#1SM-E47A0-V0 (sold separately), plus it actually reduces noise levels by as much as 1.5dBA. The Header is designed to perform in the worlds premiere professional racing series. It produces long header torque and short header over-rev.
Made from premium titanium material.
This accessory is restricted to closed-course use
Fits:
This exhaust system features durable Grade 304 Stainless Steel, TIG-welded construction and billet aluminium. Uniquely track tested to improve hit, delivery and pulling power with substantial performance gains over the stock system.
Performance improvements over stock system
Features stainless steel header, mid pipe and aluminium muffler
Lightweight magnesium end cap; riveted on for increased durability
Welded construction for reduced weight
Stepped perforated core to reduce heat
Removable bolts at inlet cap for easy repacking
Note: For closed-course competition only.
Fits:
This exhaust system features durable Grade 304 Stainless Steel, TIG-welded construction and billet aluminuim. Uniquely track tested to improve hit, delivery and pulling power with substantial performance gains over the stock system.
Performance improvements over stock system
Aluminium muffler
Lightweight magnesium end cap; riveted on for increased durability
Stepped perforated core to reduce heat
Removable bolts at inlet cap for easy repacking
Note: For closed-course competition only.
Fits:
This Muffler is designed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial, no matter your riding style or ability.
Features include space age internal packing for maximum packing life and a high-flow modular end cap. Internal core shape uses high-flow technology. Enhanced sonic evacuation provides for higher flow and increased power.
Muffler includes removable spark arrestor. 97.5dbA sound level.
This accessory is restricted to closed-course use.
Fits:
The patented Resonance Chamber Technology enhances and refines exhaust pressure. Its patented core shape lowers sound level while maintaining maximum power output, and the patented canister shape increases internal volume for more sound-absorbing material. Factory Forward Engineering centralizes mass and is less prone to impact damage.
Maintenance is easy remove four screws on the front end cap, and the innovative rear end cap simplifies the installation of the spark arrestor (sold separately) or tuning tip inserts. Includes QuietCore 94 dBA insert. Meets most sound requirements.
It is compatible with stock or GYTR header and made in the U.S.A.
This accessory is restricted to closed-course use.
Fits:
These original-equipment Gasket Kits were designed for convenience and total savings. Kits include the necessary gaskets, seals, and O-rings needed to reassemble your engine.
The Top End Gasket Kit includes:
1 × 1SM-11351-00 (Cylinder Gasket)
1 × 4FM-12213-00 (Tensioner Case Gasket)
1 × 1SM-11181-00 (Cylinder Head 1 Gasket)
1 × 1SM-11193-00 (Head Cover 1 Gasket)
2 × 5UM-1119E-00 (Cover Head Bolt)
1 × 90430-06014 (Gasket)
1 × 5NL-14613-00 (Exhuast Pipe Gasket)
1 × 1SM-11194-00 (Head Cover 2 Gasket)
Fits:
These original-equipment Gasket Kits were designed for convenience and total savings. Kits include the necessary gaskets, seals, and O-rings needed to reassemble your engine.
The Bottom End Gasket Kit includes:
1 × 93102-28012 (Oil Seal)
1 × 90430-10188 (Gasket)
1 × 1SM-15451-00 (Crankcase Cover 1 Gasket)
1 × 1SM-15462-00 (Crankcase Cover 3 Gasket)
1 × 93210-16772 (O-ring – M124)
1 × 1SM-15453-00 (Gasket)
1 × 93102-18278 (Oil Seal – 22U)
1 × 93210-45708 (O-ring – 2KR)
1 × 93210-196A4 (O-ring)
1 × 33D-12427-00 (Housing Cover Gasket)
1 × 90430-06014 (Gasket)
Fits:
This GYTR radiator cage offers another level of protection against serious radiator damage. Full cage with rod design. Lightweight yet sturdy constructed with stamped 3.2mm aluminium to provide strength and protection in the event of side impacts.No modifications necessary.Easy-to-install design means radiator removal is not required. Installs in minutes
Fits:
This GYTR skid plate helps glide your bike over obstacles and provides additional protection for the water pump and engine covers. Lightweight and sturdy construction.Installs to existing mounting tabs.
Fits:
Yamaha has made it easy to put a fresh set of fenders, shrouds, and side covers on your bike. Fenders are blue and the side covers are white, just like the originals, and because they’re genuine Yamaha, they fit right the first time.
Colour: Blue (DPBSE)
KIT COMPONENTS ARE: 1 × 17D-21511-50 FENDER, FRONT 1 × 2GB-21610-00 REAR FENDER COMP 1 × 1SL-21710-00 SIDE COVER ASSY 1 1 × 2GB-21720-00 SIDE COVER ASSY 2 1 × 1SL-21730-00 SIDE COVER ASSY 3 1 × 1SL-21740-01 SIDE COVER ASSY 4 1 × 1SL-14437-00 DUCT 1 × 1SL-1443A-00 DUCT
*Kit does not include graphics
Fits:
Genuine Plastic Kits include:
- Front fender
- Rear fender
- Side cover assy 1, L / H
- Side cover assy 2, R / H
- Radiator shroud, L / H
- Radiator shroud, R / H
Colour: Blue (DPBSE).
Fits:
This tank is designed to carry more fuel and enhance the appearance of your motorcycle. Larger capacity than stock, yet very slim and sleek. Provides greater riding distance per full tank. Perfect for races where the extra distance can mean the difference between winning and losing. These tanks are made with Polyethylene Crosslink for extra strength and durability.
Suitable only for closed-course competition.
Fits:
Designed to prevent radiators from being damaged by side impacts or being bent backwards. They won’t affect cooling air flow.
Fits:
Helps protect the lower frame and critical engine components.
Fits:
Reduces heat transfer from engine to carburettor to help prevent fuel boiling and power reduction.
Fits:
These levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.
Colour: Titanuim
Fits:
These levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.
Colour: Titanuim
Fits:
These levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.
Colour: Titanuim
Fits:
High-quality fibre cartridge. Comes on a cardboard sleeve for easy installation. Suitable for 14.25" GYTR muffler cans.
Fits:
Race proven to provide the greatest protection for you engine. Two seperate layers of foam to provide excellent filtration of dirt and yet allow maximum airflow, that can be seperated for cleaning.
Fits:
High quality twin stage laminated air filter, that is competitively priced and is also durable and easy to clean. Race proven to provide the greatest protection for your engine. Two separate layers of foam to provide excellent filtration of dirt and yet allow maximum airflow.
Fits:
Relocates the controls for the computer to the left thumb for easy operation.
Fits:
This graphics kit includes Radiator/Tank Shrouds, Airbox and Swingarm decals all with the unique design and GYTR Logo.
Fits:
This aluminium plate is designed with side skirts to help protect the lower frame rails, critical engine components, water pump, ignition cover and clutch components even on the gnarliest enduro course.
Fits:
GYTR Clutch Components are precision machined from aerospace-quality aluminium alloys with a unique hard coating. This provides superior performance and clutch feel, as well as excellent component durability. The patent-pending "auto oiling system" forces oil through specially cut holes in the pressure plate, into the inner hub, and then to the clutch plates. This results in improved clutch performance, with lower clutch temperatures, less clutch expansion and extended clutch life.
Fits:
Deep Purplish Blue Metallic (DPBMC) Frame Paint
Commonly reffered to as “Yamaha Blue” DPBMC touch up paint is now available in aerosol spray pack. This paint will be handy for touching up scuff marks on frames and tidying up wear and tear on DPBMC coloured parts.
Fits: